Right, I’ve received quite a few emails asking how I’ve made the self-watering pot that is the home to two of my Radish seedlings. I thought it would be easier to blog it. Here goes!
Take an empty pop bottle – I have used a 2 litre water bottle:
Cut your bottle into two pieces. Making sure that bottom of the bottle is shorter in length – I measured mine the bottom piece is about 4.5″ and the top piece is roughly 7″.
Yours doesn’t have to be the same:
Next, slip the top half of the bottle inside the base of the bottle. With the neck pointing down. You might need to use a bit of force to get it to fit inside. Make sure you wedge it in tight and you should have something that looks like this:
The bottom of the bottle should fill up. Then you will notice the water feeding through the inner holes. Once you’ve got that to a T, empty the bottle and start filling it with compost!
Make sure when you’re filling it to pack the compost tight into the neck hole of the bottle. This stops the water getting into the compost easily and turning it into sludgy muck.
Your plant will go days without the need for watering, no need to feel the soil – Just check the water-well. If it’s running low, top it up! Hey presto…. A self-watering pot!